We Are Tradex
Scaffold Couplers
Tradex scaffolding fittings are manufactured to ISO9002 / BS5750 / EN74 quality assurance, it is Conform to BS1139 part 2 and EN74 Class A & B where applicable. Tubes comply to EN39: 2001 and Tradex Scaffolding and formwork Boards conform to BS 2482 and laminated Boards to Osha Standards and Stell Boards to EN 12811-1
Tradex fittings has a simple numerical code reference, which is unique and differentiates it from every other fitting. The code defines the type of fitting and the tube size or sizes it is designed to receive.
Alpha Fittings
Fixed Double Coupler
Specification: Forged Double Coupler Scaffold Clamp Zinc Plated, for 48.3mm o/d Tube. Quality Control: Tested to EN74B
Drop Forge Swivel
Coupler
Specification:Forged Swivel Coupler, High grade steel, zinc plated for 48.3mm o/d Tube. Quality Control: Batch tested to EN74A.
Pressed Steel Swivel Coupler
Specification: Pressed Steel Swivel Scaffolding fitting, Zinc Plated, for 48.3mm o/d Tube. Quality Control: Batch Tested to EN74.
Pressed Steel Putlog Coupler
Specification: Pressed Steel Single Scaffolding Fitting, Zinc Plated, for 48.3mm o/d Tube. Quality Control: Batch Tested to EN74
Putlog Coupler
Specification: Forged Single Coupler, High Grade Steel, Zinc Plated, for 48.3mm o/d Tube. Quality Control: Batch Tested, Tested to EN74, BS1139.
Fixed Gravlock
Specification: Forged Girder Coupler, High grade steel, zinc plated for 48.3mm o/d tube. Quality Control: Batch Tested, Tested to EN74. To be used in pairs
Steel
Sleeve
Specification: Pressed Steel Sleeve Scaffolding Fitting, Zinc Plated, for 48.3mm o/d tube.Quality Control: Batch Tested to EN74
Board Retaining
Clamp
Specification: Forged Steel Board Clamp, Zinc Plated, for 48.3mm o/d Tube. Quality Control: Batch Tested, Tested to EN74.
Supa Tie
Gravlok type anchor system Only to be used on good brick / solid walls / floors. M16 Fitting
Stair Tread
Bracket
Used in pairs when a temporary stair tread is required, fully adjustable to any angle / rake and are left or right handed.
Band & Plate
Specification: Forged Band and Plate 48.3mm – High grade steel. zinc plated. Quality Control: Batch Tested, Tested to EN74.
Joint Pin
Specification: Pressed Joint Pin (Spigot) , Zinc Plated, for 48.3mm o/d Tube. Quality Control: Batch Tested, Tested to EN74
